[Printing-summit] printer manufacturer roundtable

Yie, Shiyun shiyun.yie at hp.com
Wed Oct 18 07:52:43 PDT 2006


In that case, HP can use a 10 minute slot for a short presentation.

Thanks,
-Shiyun 

-----Original Message-----
From: printing-summit-bounces at lists.freestandards.org
[mailto:printing-summit-bounces at lists.freestandards.org] On Behalf Of Ian
Murdock
Sent: Wednesday, October 18, 2006 5:36 AM
To: George Liu
Cc: printing-summit at freestandards.org
Subject: Re: [Printing-summit] printer manufacturer roundtable

Ok, here's the current plan for the printer manufacturer slot.

I've set aside 9:30 - 10:15 for presentations. Right now, I have Canon in
the 9:30 - 9:45 slot, and a slot for George Liu of Ricoh immediately
following that (George: Let me know how much time you need here.) Anyone
else wanting to give a brief presentation before the roundtable: Please let
me know and send time requirements etc. 10:15 - 10:45 will be for the
roundtable, and I'll go ahead and leave all the printer manufacturer
representatives listed, and we can decide on the fly who will participate
(i.e., it'll be more of a group discussion than a panel or somesuch).

How's that?

-ian


On 10/17/06, George Liu <george.liu at ussj.ricoh.com> wrote:
>
>
> > -----Original Message-----
> > From: printing-summit-bounces at lists.freestandards.org
> [mailto:printing-
> > summit-bounces at lists.freestandards.org] On Behalf Of Ian Murdock
> > Sent: Tuesday, October 17, 2006 2:05 PM
> > To: Till Kamppeter
> > Cc: printing-summit at freestandards.org
> > Subject: Re: [Printing-summit] printer manufacturer roundtable
> >
> > How about giving everyone participating a set amount of time to
> > (optionally) present something? Would 5 minutes be enough time?
> > There are 6 vendors so that's 30 minutes for presentations (out of 
> > our 75 minute slot).
> >
> > Speaking of the printer manufacturer roundtable, I currently have 
> > the following people listed as participants:
> >
> >     * Canon: Toratani Yasumasa
> >     * Fuji Xerox: Osamu Mihara
> >     * HP: David Suffield, Shiyun Yie
> >     * Lanier: Uli Wehner
> >     * Lexmark: Vincent Valentus
> >     * Ricoh: Jun Galamay, George Liu, Chris Story
> >
> > HP and Ricoh folks: Can you pick one person to participate in the 
> > roundtable and let me know who it will be?
> [George Liu]
> I'll give a short presentation for Ricoh.
>
> >
> > Everyone: Please verify that you will be present and are willing to 
> > participate in this.
> >
> > -ian
> >
> > On 10/17/06, Till Kamppeter <till.kamppeter at gmail.com> wrote:
> > > What about placing it as the beginning of the round table?
> > >
> > >     Till
> > >
> > > TORATANI Yasumasa wrote:
> > > > Hi,
> > > >
> > > > Round table works for us.
> > > >
> > > > On the other hand, this is the first time for us to atttend the
> summit,
> > > > so we appreciate it if we can have a short presentation time
> (15-20min
> > or so)
> > > > of our linux printer driver before or after the round table.
> > > >
> > > > Regards,
> > > > TORATANI
> > > >
> > > >
> > > > On Fri, 13 Oct 2006 13:35:22 -0400 "Ian Murdock" 
> > > > <imurdock at imurdock.com> wrote:
> > > >
> > > >> I'm working on the schedule now, and I've set aside Monday
> 9:30-10:45
> > for
> > > >> printer manufacturer feedback. I'm aware of at least the 
> > > >> following attendees from printer manufacturers that will be at
> the
> > summit:
> > > >>
> > > >>     * Canon: Toratani Yasumasa
> > > >>     * Epson: Glen Petrie
> > > >>     * Epson Avasys: Olaf Meeuwissen
> > > >>     * HP: John Manuel, David Suffield, Shiyun Yie
> > > >>     * Lanier: Uli Wehner
> > > >>     * Lexmark: Vincent Valentus
> > > >>     * Ricoh: Jun Galamay, George Liu, Chris Story
> > > >>
> > > >> Anyone else?
> > > >>
> > > >> So, printer manufacturers, how would you like to structure this?
> I'd
> > > >> suggest a roundtable structure, where one representative from
> each
> > company
> > > >> could speak about the problems with open-source printing from
> your
> > > >> company's point of view, rather than a series of presentations,
> as I
> > > >> think that would be a more efficient use of the time. I'd be
> happy
> > > >> to moderate the roundtable to keep the discussion focused.
> Thoughts?
> > > >>
> > > >> -ian
> > > >> --
> > > >> Ian Murdock
> > > >> 317-863-2590
> > > >> http://ianmurdock.com/
> > > >>
> > > >> "Don't look back--something might be gaining on you." --Satchel
> Paige
> > > >>
> > > >> _______________________________________________
> > > >> Printing-summit mailing list
> > > >> Printing-summit at lists.freestandards.org
> > > >> http://lists.freestandards.org/mailman/listinfo/printing-summit
> > > >
> > > > -----------------------------------------
> > > > TORATANI Yasumasa
> > > > Software Engineering Dept.23
> > > > Platform Technology Development Headquarters, CANON INC.
> > > >
> > > > _______________________________________________
> > > > Printing-summit mailing list
> > > > Printing-summit at lists.freestandards.org
> > > > http://lists.freestandards.org/mailman/listinfo/printing-summit
> > > >
> > >
> > >
> >
> >
> > --
> > Ian Murdock
> > 317-863-2590
> > http://ianmurdock.com/
> >
> > "Don't look back--something might be gaining on you." --Satchel 
> > Paige
> >
> > _______________________________________________
> > Printing-summit mailing list
> > Printing-summit at lists.freestandards.org
> > http://lists.freestandards.org/mailman/listinfo/printing-summit
>
>
>


--
Ian Murdock
317-863-2590
http://ianmurdock.com/

"Don't look back--something might be gaining on you." --Satchel Paige

_______________________________________________
Printing-summit mailing list
Printing-summit at lists.freestandards.org
http://lists.freestandards.org/mailman/listinfo/printing-summit
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 4794 bytes
Desc: not available
Url : http://lists.linux-foundation.org/pipermail/printing-summit/attachments/20061018/9e4f151a/smime.bin


More information about the Printing-summit mailing list