[linux-pm] [PATCH 0/3] CPU PM notifiers

[Rafael J. Wysocki]

On Wednesday, June 15, 2011, Rafael J. Wysocki wrote:
> On Tuesday, June 14, 2011, Colin Cross wrote:
> > On Tue, Jun 14, 2011 at 2:34 PM, Rafael J. Wysocki <rjw at sisk.pl> wrote:
> > > On Tuesday, June 14, 2011, Colin Cross wrote:
> > >> On Tue, Jun 14, 2011 at 2:00 PM, Rafael J. Wysocki <rjw at sisk.pl> wrote:
> > >> > On Monday, June 13, 2011, Colin Cross wrote:
> > >> >> On Mon, Jun 13, 2011 at 11:37 AM, Rafael J. Wysocki <rjw at sisk.pl> wrote:
> > >> >> > On Monday, June 13, 2011, Colin Cross wrote:
> > >> >> >> This patch set tries to address Russell's concerns with platform
> > >> >> >> pm code calling into the driver for every block in the Cortex A9s
> > >> >> >> during idle, hotplug, and suspend.  The first patch adds cpu pm
> > >> >> >> notifiers that can be called by platform code, the second uses
> > >> >> >> the notifier to save and restore the GIC state, and the third
> > >> >> >> saves the VFP state.
> > >> >> >>
> > >> >> >> The notifiers are used for two types of events, CPU PM events and
> > >> >> >> CPU complex PM events.  CPU PM events are used to save and restore
> > >> >> >> per-cpu context when a single CPU is preparing to enter or has
> > >> >> >> just exited a low power state.  For example, the VFP saves the
> > >> >> >> last thread context, and the GIC saves banked CPU registers.
> > >> >> >>
> > >> >> >> CPU complex events are used after all the CPUs in a power domain
> > >> >> >> have been prepared for the low power state.  The GIC uses these
> > >> >> >> events to save global register state.
> > >> >> >>
> > >> >> >> Platforms that call the cpu_pm APIs must select
> > >> >> >> CONFIG_ARCH_USES_CPU_PM
> > >> >> >>
> > >> >> >> L2 cache is not covered by this patch set, as the determination
> > >> >> >> of when the L2 is reset and when it is retained is
> > >> >> >> platform-specific, and most of the APIs necessary are already
> > >> >> >> present.
> > >> >> >>
> > >> >> >>  arch/arm/Kconfig              |    7 ++
> > >> >> >>  arch/arm/common/gic.c         |  212 +++++++++++++++++++++++++++++++++++++++++
> > >> >> >>  arch/arm/include/asm/cpu_pm.h |   54 +++++++++++
> > >> >> >>  arch/arm/kernel/Makefile      |    1 +
> > >> >> >>  arch/arm/kernel/cpu_pm.c      |  181 +++++++++++++++++++++++++++++++++++
> > >> >> >
> > >> >> > Is there any reason why this has to be ARM-specific?  There are other
> > >> >> > architectures where this kind of feature might make sense (SH and
> > >> >> > powerpc at least).
> > >> >>
> > >> >> Nothing other than there are currently no adaptations for any drivers
> > >> >> besides ARM, but I can move it somewhere outside ARM.  Any suggestions
> > >> >> where?
> > >> >
> > >> > Well, there is kernel/cpu.c.  It contains mostly CPU hotplug and PM
> > >> > code at the moment, so it looks like a good place.
> > >>
> > >> OK, I'll look at moving it there.
> > >>
> > >> >> > Besides, is there any overlap between this feature and the CPU hotplug
> > >> >> > notifiers?
> > >> >>
> > >> >> I don't think so - the hotplug notifiers are used when a CPU is being
> > >> >> removed from the system, so no saving and restoring is necessary - the
> > >> >> CPU will be rebooted from scratch.  They are used by systems outside
> > >> >> the CPU that need to know that a CPU no longer exists.
> > >> >>
> > >> >> CPU PM notifiers are used when a CPU is going through reset in a way
> > >> >> that should be transparent to most of the system.
> > >> >
> > >> > Do I guess correctly that you mean cpuidle?
> > >>
> > >> cpuidle is the major user, but primary CPUs in suspend have to save
> > >> and restore the same blocks, and tend to use the same platform sleep
> > >> code as idle, so it's logical to use the notifiers for both.  On the
> > >> other hand, some drivers that would use cpu_pm notifiers already use
> > >> syscore ops to handle suspend and resume (like vfp) - maybe these
> > >> notifiers should only be used in cpuidle, and syscore ops added to the
> > >> gic driver?  I could also convert the notifiers to new syscore_ops -
> > >> cpu_idle, cpu_unidle, cpu_cluster_idle, cpu_cluster_unidle, but I
> > >> don't know how well that fits in to the intention for syscore.
> > >
> > > Basically, syscore_ops deal with the situation during system suspend
> > > when all CPUs but one have been switched off (through CPU hotplug)
> > > and interrupts are off on the only active CPU.  If there's anything
> > > you need to do at this point, syscore_ops is the right thing to use.
> > > And analogously for system resume.
> > >
> > > Moreover, for system suspend switching off the "boot" CPU (i.e. the only one
> > > that remains active through the whole sequence) should really be the last
> > > thing done, everything else should have been handled through syscore_ops
> > > before.
> > 
> > Yes, but what to do with idle, which generally needs to do the exact
> > same things as handled in some syscore ops?  Extend syscore ops, or
> > add the new notifier, and each driver can implement both syscore and
> > cpu_pm listeners (and probably call the same helper function to handle
> > both)?
> 
> Good question.  I don't think I have a good answer to it at the moment, need
> to ponder that a bit more.

So, it looks like system suspend only needs those things because it uses
(a part of) the cpuidle infrastructure to put the CPU into a low-power state.
Thus from the system suspend point of view, they are parts of the "switch the
CPU off" operation, so syscore_ops don't seem to be suitable for doing them.
That said, they seem to belong to cpuidle rather than to "general PM".

Thanks,
Rafael