[Bugme-new] [Bug 13619] New: Inserting a video DVD causes a kernel panic
bugzilla-daemon at bugzilla.kernel.org
bugzilla-daemon at bugzilla.kernel.org
Thu Jun 25 01:12:24 PDT 2009
http://bugzilla.kernel.org/show_bug.cgi?id=13619
Summary: Inserting a video DVD causes a kernel panic
Product: IO/Storage
Version: 2.5
Kernel Version: 2.6.30
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
AssignedTo: io_ide at kernel-bugs.osdl.org
ReportedBy: debian at carbon-project.org
Regression: Yes
Created an attachment (id=22088)
--> (http://bugzilla.kernel.org/attachment.cgi?id=22088)
Transcript of the output caused by the kernel panic after booting with a video
DVD.
Hello,
just noticed, that since 2.6.30 (2.6.29.4 worked fine) inserting (or booting
with an inserted, for that matter) video DVD causes a kernel panic. please see
the the attached transcript of the panic output for further details.
$ dmesg | grep DVD-ROM
hdc: Pioneer DVD-ROM ATAPIModel DVD-104S 020, ATAPI CD/DVD-ROM drive
ide-cd: hdc: ATAPI DVD-ROM drive, 512kB Cache
$ lspci -vvxxx
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1)
Subsystem: ASUSTeK Computer Inc. Device 80ac
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-nvidia
00: de 10 e0 01 06 00 b0 00 c1 00 00 06 00 00 80 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
Subsystem: ASUSTeK Computer Inc. Device 80ac
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 ea 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: ASUSTeK Computer Inc. Device 80ac
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 ee 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: ASUSTeK Computer Inc. Device 80ac
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 ed 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: ASUSTeK Computer Inc. Device 80ac
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 ec 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: ASUSTeK Computer Inc. Device 80ac
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 ef 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00: de 10 60 00 0f 00 b0 00 a4 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ad 80
30: 00 00 00 00 48 00 00 00 00 00 00 00 00 00 00 00
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00: de 10 64 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e7001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00: de 10 67 00 07 00 b0 00 a4 10 03 0c 00 00 80 00
10: 00 10 00 e7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at e7002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00: de 10 67 00 07 00 b0 00 a4 10 03 0c 00 00 80 00
10: 00 20 00 e7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 02 03 01
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
(prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 21
Region 0: Memory at e7003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00: de 10 68 00 06 00 b0 00 a4 20 03 0c 00 00 80 00
10: 00 30 00 e7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 03 03 01
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller
(rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2
Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e400 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00: de 10 66 00 07 00 b0 00 a1 00 00 02 00 00 00 00
10: 00 00 00 e7 01 e4 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a7 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e6000000-e6ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00: de 10 6c 00 07 01 a0 00 a3 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 80 a2
20: 00 e6 f0 e6 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 02
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a
[Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00: de 10 65 00 05 00 b0 00 a2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: de 10 e8 01 07 01 20 02 c1 00 04 06 00 20 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 20 02
20: 00 e4 f0 e5 00 d0 f0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00
01:08.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs Device 1008
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
00: 02 11 04 00 05 00 90 02 04 00 01 04 00 20 80 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 08 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
01:08.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
Subsystem: Creative Labs SB Audigy2 MIDI/Game Port
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at c400 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
00: 02 11 03 70 05 00 90 02 04 00 80 09 00 20 80 00
10: 01 c4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 60 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
01:08.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
(prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e6004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e6000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
00: 02 11 01 40 06 00 10 02 04 10 00 0c 08 20 80 00
10: 00 40 00 e6 00 00 00 e6 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 10 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 02 02 04
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Radeon
9500 Pro] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e4000000 [disabled] [size=128K]
Capabilities: <access denied>
00: 02 10 45 4e 87 00 b0 22 00 00 00 03 08 20 80 00
10: 08 00 00 d0 01 d0 00 00 00 00 00 e5 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00
30: 00 00 00 00 58 00 00 00 00 00 00 00 0c 01 08 00
02:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500 Pro]
(Secondary)
Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at d8000000 (32-bit, prefetchable) [disabled]
[size=128M]
Region 1: Memory at e5010000 (32-bit, non-prefetchable) [disabled]
[size=64K]
Capabilities: <access denied>
00: 02 10 65 4e 80 00 b0 02 00 00 80 03 08 20 00 00
10: 08 00 00 d8 00 00 01 e5 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
If you should need further information (maybe the configuration of the
kernel?), please feel free to ask.
Kind regards,
Kai Wasserbäch
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
More information about the Bugme-new
mailing list